Phase what the heck is phase part 3

In the following screen capture i used a 100Hz sine wave sent to the Lake LM26. Via a matrix this 100Hz sine wave is sent to 2 outputs which are summed via a y-split.

The summed response is connected to Smaart V8 measurement input 6 (RIO1608) with different delay settings applied to the 2nd output of the LM26 to see what the sum would be.

Enjoy 😉

(this screen capture was made for all who attended 1 of my Smaart training sessions and who ever feels like watching and enjoying a pretty irritating 100Hz sine wave….)