FIR DESIGNER M dtp (direct to processor) using in this case a LAKE/LABGRUPPEN D SERIES 10:4   Leave a comment

Here is “a” way of working with the FIR DESIGNER M DTP (direct to processor) function. I’m still learning how to work with the various software packages in the screen captures so if i’m wrong about something: sorry 

Also the speaker used will be tuned using 1 mic position which is not a way of working i would recommend.

Using multiple mic position is the way to go but for these screen captures I choose 1 mic position just to show how you might use the possibilities of a combination of Smaart V8, FIR Designer M and the Lake/Labgruppen interface – hardware.

The screen captures were taken while learning how to work with this combination of softs (took about 1 hour of recording the captures and more then a day of editing ;-).

First setting up FIR DESIGNER M dtp and the LAKE interface

Capture traces with Smaart V8

EQ and Phase corrections on output 3: high

EQ and Phase corrections on output 2: Mid + final phase alignment

 

I’ll probably be adding some more stuff to this post but for now

Enjoy.

 

Posted 10/07/2019 by timobeckmangeluid in Geen categorie

Geef een reactie

Vul je gegevens in of klik op een icoon om in te loggen.

WordPress.com logo

Je reageert onder je WordPress.com account. Log uit /  Bijwerken )

Google photo

Je reageert onder je Google account. Log uit /  Bijwerken )

Twitter-afbeelding

Je reageert onder je Twitter account. Log uit /  Bijwerken )

Facebook foto

Je reageert onder je Facebook account. Log uit /  Bijwerken )

Verbinden met %s

%d bloggers liken dit: